Epoxy Flooring Price in Kenya (2026): Cost Per m² by Type, Size and Project

Epoxy flooring in Kenya costs between KES 1,500 and KES 8,000 per square metre installed (excluding 16% VAT), depending on the system. A basic single-colour coating sits at the low end, decorative systems such as metallic and 3D floors sit in the middle to upper range, and heavy-duty polyurethane (PU) screed for food plants and industrial sites sits at the top. Most homeowners and small businesses spend between KES 2,200 and KES 4,800 per m².

Below you will find 2026 price ranges for every major system, worked cost examples for real project sizes, the nine factors that move your quote, and a checklist for comparing quotes from different contractors.

Epoxy Flooring Price in Kenya at a Glance (2026)

  • Overall range: KES 1,500 to 8,000 per m², installed
  • Most common range: KES 2,200 to 4,800 per m²
  • Garage (18 m²): about KES 40,000 to 63,000
  • Showroom (60 m²): about KES 190,000 to 290,000
  • Warehouse (500 m²): about KES 1,000,000 to 1,500,000 (volume rate)
  • Prices exclude: 16% VAT, major slab repairs and moisture barriers

Epoxy Floor Price List in Kenya by System (2026)

Epoxy systemPrice per m² (KES)Typical thicknessBest forExpected lifespan
Epoxy floor paint / thin coat1,500 to 2,5000.3 to 0.5 mmStores, light-use rooms, budget refresh2 to 4 years
Standard solid-colour epoxy2,200 to 3,5001 to 2 mmGarages, workshops, parking, homes5 to 10 years
Anti-slip epoxy2,500 to 4,0001.5 to 3 mmRamps, wet areas, kitchens, loading bays5 to 10 years
Epoxy flake / quartz2,800 to 4,8002 to 4 mmShowrooms, offices, restaurants, garages8 to 12 years
Self-levelling epoxy3,200 to 4,8002 to 3 mmHospitals, showrooms, clean areas, warehouses8 to 15 years
Metallic epoxy3,500 to 6,0002 to 3 mmLiving rooms, retail, hotel lobbies8 to 12 years
3D epoxy4,000 to 6,5003 to 5 mmFeature floors, bars, retail, bathrooms8 to 12 years
Anti-static (ESD) epoxy4,000 to 7,0002 to 3 mmData centres, electronics, control rooms8 to 15 years
PU-cement screed4,500 to 8,0004 to 9 mmFood and beverage plants, cold rooms, CIP areas10 to 20 years

Prices are typical installed ranges for sound concrete slabs, including basic preparation, primer, body coat and topcoat. Your quote depends on your slab, your area and your finish. Always get a site visit.

Epoxy Floor Cost in Kenya by Type of Space

SpaceTypical sizeRecommended systemEstimated total (KES)
Single garage18 m²Standard solid-colour epoxy40,000 to 63,000
Home living area40 m²Metallic or self-levelling130,000 to 240,000
Home kitchen25 m²Self-levelling epoxy80,000 to 120,000
Retail shop60 m²Self-levelling or flake190,000 to 290,000
Restaurant kitchen100 m²Anti-slip epoxy or PU screed250,000 to 800,000
Warehouse500 m²Heavy-duty epoxy (volume rate: KES 2,000 to 3,000)1,000,000 to 1,500,000
Food-grade plant300 m²PU-cement screed1,350,000 to 2,400,000
Data centre / server room200 m²Anti-static (ESD) epoxy800,000 to 1,400,000

What Is Included in an Epoxy Flooring Price?

A professional per-m² price normally covers:

  1. Surface preparation: diamond grinding or shot blasting, vacuuming and dust removal
  2. Minor crack and joint repair: filling hairline cracks and small defects
  3. Primer: to bond the system to the concrete
  4. Body coat: the epoxy or PU layer that sets the thickness
  5. Topcoat or sealer: for gloss, UV and chemical resistance
  6. Labour, materials and equipment
  7. Site cleanup

Usually not included: 16% VAT, major slab repairs, removal of old tiles or failed coatings, moisture barriers, skirting or cove details, and night or weekend work.

9 Factors That Affect the Price of Epoxy Flooring in Kenya

  1. Type of system. A thin coating costs a fraction of a 5 mm 3D floor or a 6 mm PU screed. System choice is the biggest price driver.
  2. Floor area. Larger jobs get lower per-m² rates because setup, mixing and mobilisation are spread over more floor. A 500 m² warehouse can cost KES 500 to 1,000 less per m² than a 20 m² room.
  3. Condition of the slab. Oil stains, cracks, laitance, old paint and uneven areas need grinding and repair. A bad slab can add KES 200 to 800 per m².
  4. Moisture in the concrete. New slabs need at least 28 days of curing. Damp slabs may need a moisture barrier primer, which adds cost but prevents bubbling and peeling.
  5. Thickness. A 3 mm floor uses roughly three times the material of a 1 mm coating. Thicker systems last longer and handle heavier loads.
  6. Finish and design. Single colour is the cheapest. Flakes, metallic pigments and 3D printed designs add materials and skilled labour.
  7. Performance requirements. Chemical resistance, anti-slip texture, anti-static properties, thermal shock resistance and food-grade certification all raise material cost.
  8. Location and access. Nairobi and Kiambu jobs are cheaper to mobilise than Mombasa, Kisumu or remote sites. Upper floors without lift access add labour.
  9. Timeline and working hours. Night shifts, weekend work and fast-track schedules for hotels, kitchens and plants cost more than standard hours.

Worked Examples: What You Will Actually Pay

ProjectAreaSystemRate used (KES/m²)Estimated cost (KES, excl. VAT)
Single-car garage18 m²Standard solid-colour epoxy2,200 to 3,50039,600 to 63,000
Home kitchen25 m²Self-levelling epoxy3,200 to 4,80080,000 to 120,000
Retail showroom60 m²Self-levelling epoxy3,200 to 4,800192,000 to 288,000
Warehouse500 m²Heavy-duty epoxy, volume rate2,000 to 3,0001,000,000 to 1,500,000
Food plant300 m²PU-cement screed4,500 to 8,0001,350,000 to 2,400,000

Add 16% VAT to get the final figure. For a 60 m² showroom at KES 240,000, VAT is KES 38,400, so the total is KES 278,400.

How to Calculate Your Epoxy Flooring Budget

  1. Measure the floor. Length × width in metres gives the area in m². For L-shaped rooms, split into rectangles and add them.
  2. Pick your system from the price table above.
  3. Multiply the area by the low and high rates to get your range.
  4. Add an allowance for preparation if the floor is cracked, oily, damp or has an old coating: 10% to 25% is a safe margin.
  5. Add 16% VAT.
  6. Book a site visit to turn the range into a fixed quote.

Example: 40 m² living room, metallic epoxy at KES 3,500 to 6,000 per m² = KES 140,000 to 240,000. Add 10% for preparation = KES 154,000 to 264,000. With VAT: KES 178,640 to 306,240.

Epoxy vs Tiles vs Polished Concrete vs Vinyl in Kenya

FeatureEpoxyCeramic / porcelain tilesPolished concreteVinyl / LVT
Upfront costLow to high, depending on systemMedium to highMediumMedium
Joints and groutNone (seamless)Many grout linesFew saw-cut jointsSeams
CleaningWipe or mopGrout traps dirtEasyEasy
Chemical resistanceHighMediumLowMedium
Lifespan5 to 20 years15 to 25 years15+ years5 to 15 years
RepairsSpot repair and recoatReplace tilesRe-polishReplace planks
Best forGarages, kitchens, industry, modern interiorsBathrooms, living areasWarehouses, modern homesOffices, rental units

For large open areas, epoxy is often cheaper than good tiles once laying and grouting are counted. For small rooms, tiles can be cheaper. Read our guide on 5 reasons Kenyans are switching from tiles to epoxy floors for the full comparison.

Epoxy vs PU-Cement Screed: Which Do You Need?

 EpoxyPU-cement screed
Thickness1 to 5 mm4 to 9 mm
Thermal shock (hot water, steam, CIP)LimitedExcellent
Moisture toleranceNeeds a dry slabTolerates damp slabs
Typical useGarages, homes, showrooms, warehousesDairies, breweries, food plants, cold rooms
Price per m²KES 1,500 to 6,500KES 4,500 to 8,000

If your floor sees hot washdowns, steam or acids, epoxy will fail early and PU screed is the right specification, even though it costs more upfront.

8 Ways to Reduce Your Epoxy Flooring Cost Without Cutting Quality

  1. Group areas into one job. One mobilisation for the garage, store and workshop is cheaper than three.
  2. Choose the right system, not the fanciest. A solid-colour coat in a workshop performs as well as a decorative one.
  3. Fix moisture and drainage first. This prevents costly failures later.
  4. Clear the space. Empty rooms save labour hours.
  5. Accept standard colours. Custom tints and designs add cost.
  6. Book in the off-peak season. Schedules are more flexible outside year-end rush.
  7. Allow normal working hours. Night and weekend work carries a premium.
  8. Avoid the cheapest quote by default. A thin coat at KES 1,000 per m² often fails within two years and costs more to strip and redo.

6 Red Flags in Cheap Epoxy Quotes

  • A price below KES 1,500 per m² for a floor that is supposed to carry vehicles or forklifts
  • No mention of grinding or shot blasting; sweeping and applying paint over dust will peel
  • No stated thickness in mm or number of coats
  • No product brand or technical data sheet
  • No warranty or a vague “guarantee” without terms
  • Cash-only, no written quote and no site visit

What a Good Epoxy Flooring Quote Should Include

  1. Floor area in m² and the measured rate per m²
  2. The system name, thickness and number of coats
  3. Surface preparation method
  4. Product brand and data sheet
  5. Curing and handover times
  6. Warranty terms
  7. Payment schedule
  8. VAT clearly stated

Epoxy Flooring Price in Kenya: Frequently Asked Questions

How much does epoxy flooring cost per square metre in Kenya?

Epoxy flooring costs KES 1,500 to 8,000 per m² installed, excluding 16% VAT. Standard coatings run KES 2,200 to 3,500, self-levelling KES 3,200 to 4,800, 3D floors KES 4,000 to 6,500, and PU screed KES 4,500 to 8,000.

How much does it cost to epoxy a garage in Kenya?

An 18 m² single-car garage costs about KES 40,000 to 63,000 with a standard epoxy coating, before VAT.

How much is a 3D epoxy floor in Kenya?

3D epoxy flooring costs KES 4,000 to 6,500 per m². Custom printed designs sit at the top of that range.

Is epoxy flooring cheaper than tiles in Kenya?

For large areas, usually yes, because there are no grout lines and no tile supply. For small rooms, basic tiles can be cheaper. Epoxy wins on cleaning and seamlessness.

How long does an epoxy floor last?

A thin coating lasts 2 to 4 years. A properly installed 2 to 3 mm system lasts 8 to 15 years, and PU screed can last 20 years under heavy use.

How long does epoxy flooring take to install?

A garage takes 2 to 4 days. Light foot traffic is possible after 24 hours, vehicles after 3 to 7 days, and full chemical cure takes about 7 days.

Can epoxy be applied over old tiles or existing coatings?

Sometimes. Tiles must be firmly bonded and the surface profiled. Failed coatings should be ground off. A site inspection confirms whether the floor can be coated or needs removal.

Does epoxy flooring price change by location?

Yes, slightly. Nairobi, Kiambu and Thika are the lowest-cost zones. Mombasa, Nakuru, Kisumu and remote sites carry transport and accommodation costs.

Do you charge for site visits and quotations?

Our site assessment and quotation are free within Nairobi.

Why Get Your Epoxy Floor Quote From Epoxy Flooring Kenya

  • Residential, commercial and industrial projects, including food-grade, anti-static (ESD) and PU-screed floors
  • Written quotes that state the system, thickness, preparation and warranty of two (2) years.
  • 9 years in business and over 100 projects completed.
  • Free site assessment in Nairobi

Not sure which system fits your space? Read Epoxy Flooring in Kenya: Everything You Need to Know, the pros and cons of epoxy floors for homes, or our guide to the 6 best epoxy flooring companies in Kenya.

Get Your Exact Epoxy Flooring Quote

Send us your floor dimensions, location and the use of the space, and we will reply with system options and a fixed quote in KES.

WhatsApp: 0726514420| Phone: 0726514420| Email: [email protected]